When to Use:

4mm long legged tile spacers, used for fixing floor tiles.

Features:

- Quick, easy & accurate alignment of tiles
- Creates a 4mm groutline throughout
- To be used with square ceramic floor tiles
- Are reusuable after first initial use.

How to Use:

What you'll need;-

- Tile Spacers
- Tiles
- Adhesive
- Latex Gloves
- Notch Trowel
- Adhesive Spreader (Optional)
- Grout Float
- Hydro Cleaning Sponge
- Mixing Bucket (For mixing adhesive)

1.) Using a Bright Ideas Notch Trowel, apply a bed of adhesive over an approximate area equivalent to four tiles.

2.) Fix the first tile squarely into position and place a 4mm tile spacer at each corner.

3.) Using a twisting action position the next tile alongside the first tile and place a 4mm spacer at each of the corners.

4.) Repeat points 1 to 3 for all subsequent tiles applied.

5.) After all tiles have been applied to the surface, proceed to grout over all the tiles using a Bright Ideas Grout Float, making sure to leave spacers in their fixed positions.

6.) Allow the grout time to set before cleaning away any excess grout with a Bright Ideas Hydro Cleaning Sponge.

Fig 1:
A close up image of a tiler fixing tile spacers
in-between tiles to evenly space them out in order to create an even grout line throughout. The tiler is wearing a pair of latex gloves which will protect his hands against any harmful substances in the grout or adhesive.

Fig 2:
A clearer look of a tiler using tile spacers to evenly spread out and install tiles, creating
an even groutline throughout. A main beneift
to using tile spacers is that they are reusable
time and time again for different tiling applications.