Featuring a unique tip which prevents the drill from slipping, the Bright Ideas Tile & Glass Drill Bits are highly recommended for cutting through ceramic, glass and also travertine.
- Highly useful for cutting through ceramic, travertine, and glass tiles. It is
recommended that when using a Bright Ideas Tile & Glass Drill Bit, that you proceed to use a slow drilling speed with a power drill. Always keep the drill tip cool using water as this will prolong the life of the drill bit.
How to Use:
What you'll need:-
- 8mm Tile and Glass Drill Bit
- Power Drill with Variable Speed
- Water (For keeping drill bit cool)
- Tile / Glass / Travertine
1.) Always use a slow drilling speed. Preferably use a power drill with a variable speed.
2.) The unique cutting tip will allow ease of cut, without having to use a centre punch, masking tape or any other device to hold the carbide tip in
position.
3.) Always keep the carbide drill tip and workpiece cool using water. This will prolong the life of the tile and glass drill bit.
FIG 1:
A close up of the Bright Ideas Tile and Glass
Drill Bit, showing the unique carbide drill tip which helps prevent the drill from slipping.
FIG 2:
The above image shows a perfectly drilled hole that has been drilled into a ceramic tile using the Bright Ideas Tile and Glass Drill Bit.
