The Bright Ideas Co (UK) Ltd offer a vast number of different sized diamond hole saws that when combined with a universal drill guide and water cooling system, allow you to create a precise and professional finish to your tiles
- An electroplated diamond hole saw with gritted edges is highly ideal for
cutting holes into hard materials such as stone, marble and granite. Can
also be used for cutting through porcelain, ceramic, quarry tiles, glass etc.
Should be used in conjunction with the Bright Ideas Universal Drill Guide
(CTG446) for precise drilling and Water Cooling System (CTG447) for keeping the drill bit cool.
How to Use:
What you'll need:-
- 18mm Diamond Hole Saw
- Hand Drill / Speed Power Drill
- Water Cooling System
- Universal Drill Guide
1.) Always use a slow drilling speed. A hand drill is preferable or a variable speed power drill.
2.) Keep the diamond tip and workpiece cool using water.
3.) Must be used in conjunction with the Bright Ideas Water Cooling System (Item Code: CTG447) in order to keep the drill bit cool.
FIG 1:
A close up image of a Bright Ideas Diamond Hole
Saw
being drilled into a porcelain tile. The hole in the picture is drilled perfectly leaving no jagged edges, cracks or roughness.
FIG 2:
Another close up showing the Bright Ideas
Diamond Hole Saw about to drill into a wall.
The edge of the hole saw is coated with an electroplated grit for drilling finer holes.
